Uniden UPBX 416 Dokumentacja Pobierz pdf (Strona 18)

Initialising the System

This initialises the system and erases all previous inputs. There are two ways of initialising

the system - by including or excluding OGMs.

Hot Line

You can have a maximum of 4 Hot Lines. The Boss Line is automatically connected to

the Secretary station each time the Boss lifts the handset.

Caller-ID

Selects Caller ID On/Off and Caller ID Standard.

Bell : North America

V.23 : Europe

Answer Ring Count

The ring count of the extension lines can be set between 5 ~ 11. (Default : 7 )

SMDR(Station Message Detail Record)

Station message detail recording (SMDR) is a type of telephone call accounting that is

usually captured in ASCII text and sent to a printer or PC through an RS-232 connection.

The information usually includes start of call indicator, trunk group, user name, calling

party extension number, etc., and is useful for automated attendant and voice mail

systems. (Default : Not Used)

Flash Time Adjustment for Extensions

The Flash time means the actual time it takes to depress and release the plunger or the

actual handset-cradle to create a signal to the unit to put the caller on hold.

It is used for internal call transfer. The Initial flash time is assigned for 150 msec.

Message Length

Adjust the maximum length (“1~10minutes”) of outgoing and incoming messages to be

left in extension voice mailbox. One minute is default.

Voice Mail for Unattended External Calls

External calls can go to the voice mail at the attendant station. Initially they can't go to

the mail box and will be disconnected after pre-assigned rings. In the auto-attendant and

attendant modes they are automatically diverted to the voice mail at the attendant station.

In the multi-attendant mode they are automatically diverted to the voice mail at the

station 200.

Click the Initialize button on the

Toolbar

- or -

Select Initialize on the Menu.

Select the type of initialization

when the window opposite

appears.

Warning: It may take over

3 minutes to complete the

job.

If the job is not completed

by this time, check the

cable connection between

the unit and the PC and then

press “Ctrl+Alt+Delete “

keys at the same time.

This will restart the system.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23 ... 35 36

Komentarze do niniejszej Instrukcji

Brak uwag

Uniden UPBX 416 Dokumentacja Strona 18

Komentarze do niniejszej Instrukcji

Powiązane produkty i podręczniki dla Networking Uniden UPBX 416